Table of Contents

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

​

​

Commission file number: 000-29823

SILICON LABORATORIES INC.

(Exact name of registrant as specified in its charter)

​

(512) 416-8500

(Registrant’s telephone number, including area code)

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. ☑Yes ☐ No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. ☐ Yes ☑ No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ☑ Yes ☐ No

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☑ Yes ☐ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☑

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). ☐ Yes ☑ No

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold as of the last business day of the registrant’s most recently completed second fiscal quarter (July 1, 2022) was approximately $4.3 billion (assuming, for this purpose, that only directors and officers are deemed affiliates).

There were 31,899,142 shares of the registrant’s common stock issued and outstanding as of January 24, 2023.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Proxy Statement for the registrant’s 2022 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

​

​

​

Table of Contents

Table of Contents

​

​

​

Cautionary Statement

Except for the historical financial information contained herein, the matters discussed in this report on Form 10-K (as well as documents incorporated herein by reference) may be considered “forward-looking” statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such forward-looking statements include declarations regarding the intent, belief or current expectations of Silicon Laboratories Inc. and its management and may be signified by the words “believe,” “estimate,” “expect,” “intend,” “anticipate,” “plan,” “project,” “will” or similar language. You are cautioned that any such forward-looking statements are not guarantees of future performance and involve a number of risks and uncertainties. Actual results could differ materially from those indicated by such forward-looking statements. Factors that could cause or contribute to such differences include those discussed under “Risk Factors” and elsewhere in this report. Silicon Laboratories disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

​

1

Table of Contents

Part I

Item 1.    Business

Overview

Silicon Laboratories Inc. is a leader in secure, intelligent wireless technology for a more connected world. Our integrated hardware and software platform, intuitive development tools, industry-leading ecosystem, and robust support help customers build advanced industrial, commercial, home, and life applications. We make it easy for developers to solve complex wireless challenges throughout the product lifecycle and get to market quickly with innovative solutions that transform industries, grow economies, and improve lives. 

We are pioneers in wireless innovation and have spent the last two decades simplifying the complexity of radio frequency (“RF”) from silicon to cloud. Our leading Internet of Things (“IoT”) platform helps customers quickly create secure, intelligent connected devices. Our team and technology assist customers to build connected devices that measurably solve development challenges, including energy efficiency, and enable applications that support better health, innovative infrastructure and sustainable cities.

Our semiconductor devices leverage standard complementary metal oxide semiconductor (“CMOS”), a low-cost, widely available process technology. The use of CMOS technology enables smaller, more cost-effective, and energy-efficient solutions. Our software expertise allows us to develop products for markets where intelligent data capture, high-performance processing, and communication are increasingly important product differentiators. We also focus design and engineering efforts on technologies that simplify and accelerate adoption by customers of security features engineered into our silicon chips. Our expertise in analog-intensive, mixed-signal IC design in CMOS and software development allows us to develop new and innovative products that are highly integrated and secure, simplifying our customers’ designs and improving their time-to-market.

Industry Background

Intelligence is being added to electronic systems to enable internet connectivity, power efficiency, monitoring of health, safety and consumption of precious resources and an improved user experience. This in turn is increasing the demand for bandwidth, requiring more infrastructure to support higher-performance networks. The nearly ubiquitous availability of internet access and the increasing intelligence of electronic devices and mobility are enabling what is called the Internet of Things, a term that describes the exponential increase in IP-enabled devices connected to the internet.

These trends require more and more interaction between the analog world we live in and the digital world of computing, which is driving the need for analog-intensive, mixed-signal circuits in a wide range of electronic products. Traditional mixed-signal designs relied upon solutions built with numerous, complex discrete analog and digital components. While these traditional designs provide the required functionality, they are often inefficient and inadequate for use in markets where size, cost, power consumption, performance and security are increasingly important product differentiators. To improve their competitive position, electronics manufacturers must reduce the cost and complexity of their systems and enable new features or functionality to differentiate themselves from their competitors.

Simultaneously, these manufacturers face accelerating time-to-market demands and must rapidly adapt to evolving industry standards and new technologies. Because analog-intensive, mixed-signal design expertise is difficult to find, these manufacturers increasingly are turning to third parties, like us, to provide advanced mixed-signal solutions. Mixed-signal design requires specific expertise and relies on creative, experienced engineers to deliver solutions that optimize speed, power, and performance, despite the noisy digital environment, and within the constraints of standard manufacturing processes. The development of this design expertise typically requires years of practical analog design experience under the guidance of a senior engineer, and engineers with the required level of skill and expertise are in short supply.

Many IC solution providers lack sufficient analog expertise to develop compelling mixed-signal products. As a result, manufacturers of electronic devices value providers that can supply them with mixed-signal solutions offering greater functionality, smaller size, and lower power requirements at a reduced cost and shorter time-to-market.

2

Table of Contents

Products

We provide analog-intensive, mixed-signal solutions for use in a variety of electronic products in a broad range of applications for the IoT. We have built a leading wireless development platform and product portfolio for the IoT based on Bluetooth®, sub-GHz proprietary technologies, Thread, Wi-Fi®, Zigbee® and Z-Wave®. Our products integrate complex mixed-signal functions that are frequently performed by numerous discrete components in competing products into a single chip, chipset or system-on-chip (SoC). By doing so, we create products that, when compared to many competing products, offer the following benefits:

We have continued to diversify our product portfolio and introduce new products and solutions through both organic investment and acquisitions.

Revenues during fiscal 2022, 2021 and 2020 were generated predominately by sales of our mixed-signal products. The following summarizes the products that we have introduced to customers:

Wireless Microcontrollers and Sensor Products

Our EFM32™, EFM8™, 8051, wireless MCUs and wireless SoCs are based on numerous wireless protocols, including Bluetooth, sub-GHz proprietary technologies, Thread, Wi-Fi, Zigbee and Z-Wave technologies. Our family of products are ideally suited to ultra-low power IoT embedded systems that include energy friendly 8-bit mixed-signal microcontrollers, ultra-low power 32-bit microcontroller and wireless MCU connectivity solutions using the ARM® Cortex-M0+/M3/M4 and newer M33 cores. Single and multi-protocol SoC devices and modules provide flexible, highly integrated solutions designed to meet demanding requirements of IoT applications. The introduction of our Series 2 portfolio provides a greater focus on updatable device security which is becoming vital to the evolution and success of IoT. We bring enhanced capability to the industry protecting user data, system keys and manufacturer brands from malicious threats both hands-on and internet-based. Our broad portfolio addresses a variety of target markets.

Our sensor products include optical sensors (proximity, ambient light gestures and heart rate monitoring), as well as relative humidity (RH) / temperature sensors and Hall effect magnetic sensors. These devices leverage our mixed-signal capability to provide high accuracy, process technology to improve performance and lower power consumption than competing parts.

Our products are supported by Simplicity Studio™, which provides one-click access to design tools, documentation, software and support resources. In-house protocol stacks and Micrium® real-time operating system (RTOS) help simplify software development for IoT developers by coordinating and prioritizing multiprotocol connectivity, SoC peripherals and other system-level activities.

​

3

Table of Contents

We group our products as Industrial & Commercial or Home & Life based on the target markets they address. These markets and their corresponding applications are described below:

​

4

Table of Contents

​

Customers, Sales and Marketing

We market our products through our direct sales force and through a network of independent sales representatives and distributors. Direct and distribution customers buy on an individual purchase order basis, rather than pursuant to long-term agreements.

We consider our customer to be the end customer purchasing either directly from a distributor, a contract manufacturer or us. During fiscal 2022, our ten largest end customers accounted for 20% of our revenues. We had no customer that represented more than 10% of our revenues during this period. An end customer purchasing through a contract manufacturer typically instructs such contract manufacturer to obtain our products and incorporate such products with other components for sale by such contract manufacturer to the end customer. Although we sell the products to, and are paid by distributors and contract manufacturers, we refer to such end customer as our customer. Two of our distributors who sell to our customers, Arrow Electronics and Edom Technology, represented 33% and 17% of our revenues during fiscal 2022, respectively.

We maintain numerous sales offices in Asia, the Americas and Europe. Revenue is attributed to a geographic area based on the shipped-to location. The percentage of our revenues derived from outside of the United States was 83% in fiscal 2022.

Our direct sales force is comprised of many sales professionals who possess varied levels of responsibility and experience, including directors, country managers, regional sales managers, district sales managers, strategic account managers, field sales engineers and sales representatives. We also utilize independent sales representatives and distributors to generate sales of our products. We have relationships with many independent sales representatives and distributors worldwide whom we have selected based on their understanding of the mixed-signal marketplace and their ability to provide effective field sales applications support for our products.

Our marketing efforts are targeted at both identified industry leaders and emerging market participants. Direct marketing activities are supplemented by a focused marketing communications effort that seeks to raise awareness of our company and products. Our public relations efforts are focused on leading trade and business publications. Our external website is used to deliver corporate and product information. We also pursue targeted advertising in key trade publications and we have a cooperative marketing program that allows our distributors and representatives to promote our products to their local markets in conjunction with their own advertising activities. Finally, we maintain a presence at strategic trade shows and industry events. These activities, in combination with direct sales activities, help drive demand for our products.

Due to the complex and innovative nature of our products, we employ experienced applications engineers who work closely with customers and distributors to support the design-win process, and can significantly accelerate the customer’s time to market. A design win occurs when a customer has designed our ICs into its product architecture and ordered product from us. A considerable amount of effort to help a customer incorporate our ICs into its products is typically required prior to any sale. In many cases, our innovative ICs require significantly different implementations than existing approaches and, therefore, successful implementations may require extensive communication with potential customers. The amount of time required to achieve a design win can vary substantially depending on a customer’s development cycle, which can be relatively short (such as three months) or very long (such as two years) based on a wide variety of customer factors. Not all design wins ultimately result in revenue, or may result in less revenue than expected. However, once a completed design architecture has been implemented and produced in high volumes, our customers are reluctant to significantly alter their designs due to this extensive design-win process. We believe this process, coupled with our intellectual property protection, promotes relatively longer product life cycles for our products and high barriers to entry for competitive products, even if such competing products are offered at lower prices. Our close collaboration with our customers provides us with knowledge of derivative product ideas or completely new product line offerings that may not otherwise arise in other new product discussions.

5

Table of Contents

Research and Development

Through our research and development efforts, we leverage experienced analog and mixed-signal engineering talent and expertise to create new ICs that integrate functions typically performed less efficiently by multiple discrete components. This integration generally results in lower costs, smaller die sizes, lower power demands and enhanced price/performance characteristics. We attempt to reuse successful techniques for integration in new applications where similar benefits can be realized. We believe that we have attracted many of the best engineers in our industry. We believe that reliable and precise analog and mixed-signal ICs can only be developed by teams of engineers who have significant analog experience and are familiar with the intricacies of designing these ICs for commercial volume production. The development of test methodologies is just one example of a critical activity requiring experience and know-how to enable the rapid release of a new product for commercial success. We have accumulated a vast set of trade secrets that allow us to pursue innovative approaches to mixed-signal problems that are difficult for competitors to duplicate. We highly value our engineering talent and strive to maintain a very high bar when bringing new recruits to the company.

Research and development expenses were $332.3 million, $273.2 million and $235.2 million in fiscal 2022, 2021 and 2020, respectively.

Technology

Our product development process facilitates the design of highly-innovative, analog-intensive, mixed-signal ICs. Our engineers’ deep knowledge of existing and emerging standards and performance requirements helps us to assess the technical feasibility of a particular IC. We target areas where we can provide compelling product improvements. Once we have solved the primary challenges, our field application engineers continue to work closely with our customers’ design teams to maintain and develop an understanding of our customers’ needs, allowing us to formulate derivative products and refined features.

In providing mixed-signal ICs for our customers, we believe our key competitive advantages are:

To fully capitalize on these advantages, we have assembled a world-class development team with exceptional analog and mixed-signal design expertise led by accomplished senior engineers.

Analog and RF Design Expertise in CMOS

We believe that our most significant core competency is world-class analog and RF design capability. Additionally, we strive to design substantially all our ICs in standard CMOS processes. Most of our product designs now incorporate some type of RF in CMOS technology. While it is often significantly more difficult to design analog ICs in CMOS, CMOS provides multiple benefits versus existing alternatives, including significantly reduced cost, reduced technology risk and greater worldwide foundry capacity. CMOS is the most commonly used process technology for manufacturing digital ICs and as a result is most likely to be used for the manufacturing of ICs with finer line geometries. These finer line geometries can enable smaller and faster ICs. By designing our ICs in CMOS, we enable our products to benefit from this trend towards finer line geometries, which allows us to integrate more digital functionality into our mixed-signal ICs.

Designing analog and mixed-signal ICs is significantly more complicated than designing standalone digital ICs. While advanced software tools exist to help automate digital IC design, there are far fewer tools for advanced analog and mixed-signal IC design. In many cases, our analog circuit design efforts begin at the fundamental transistor level. We believe that we have a demonstrated ability to design the most difficult analog and RF circuits using standard CMOS technologies.

6

Table of Contents

Mixed-Signal, Firmware and System Design Expertise

We consider the partitioning of a circuit to be a proprietary and creative design technique. Deep systems knowledge allows us to use our mixed-signal and RF in CMOS design expertise to maximize the price/performance characteristics of both the analog and digital functions and allow our ICs to work in an optimized manner to accomplish particular tasks. Generally, we attempt to move analog functions into the digital domain as quickly as possible, creating system efficiencies without compromising performance. These patented approaches require our advanced signal processing and systems expertise. We then leverage our firmware know-how to change the ‘personality’ of our devices, optimizing features and functions needed by various markets we serve. For example, our wireless SoC devices for IoT applications integrate both digital and analog domains in a single chip. The SoCs combine ARM Cortex-M processor cores, a variety of digital and analog peripherals, hardware cryptography accelerators, and analog-intensive multiprotocol radio transceivers. This system integration at the chip level leverages our deep expertise in mixed-signal and RF design, and low-power wireless MCU architectures pioneered for more than a decade.

Microcontroller and System on a Chip Design Expertise

We have the talent and circuit integration methodologies required to combine precision analog, high-speed digital, flash memory and in-system programmability into a single, monolithic CMOS integrated circuit. Our microcontroller products are designed to capture an external analog signal, convert it to a digital signal, compute digital functions on the stream of data and then communicate the results through a standard digital interface. The ability to develop standard products with the broadest possible customer application base while being cost efficient with the silicon area of the monolithic CMOS integrated circuit requires a keen sense of customer value and engineering capabilities. Additionally, to manage the wide variety of signals on a monolithic piece of silicon including electrical noise, harmonics and other electronic distortions requires a fundamental knowledge of device physics and accumulated design expertise.

Software Expertise

Our software expertise allows us to develop products for markets where intelligent data capture, high-performance processing and communication are increasingly important product differentiators. The software we have developed to address these markets enables machine-to-machine communications, providing intelligence to electronic systems. Our products integrate high-performance, low-power wireless and microcontroller ICs with reliable and scalable software into a flexible and robust networking platform.

The demand for low-power, small-footprint wireless technology is accelerating as more and more IP-enabled end points are being connected to the IoT. Our software enables a broad range of power-sensitive applications for the IoT, including smart energy, home automation, security and other connected products. We believe that the combination of our software and IC design expertise differentiates us from many of our competitors.

As the IoT continues to mature, a new class of embedded applications is emerging, presenting feature-rich and task-intensive use cases. This growing complexity is driving the need for real-time operating systems to help simplify software development for IoT applications by coordinating and prioritizing multiprotocol connectivity, SoC peripherals and other system-level activities. In addition to being able to manage numerous application tasks, an RTOS enhances scalability, and makes complex applications predictable and reliable. To address these application needs, we acquired Micrium, an embedded RTOS provider. Micrium has established itself as a reliable, high performance and trusted RTOS software platform, with an installed base that has grown to millions of devices.

Module Integration and Wireless Design Expertise

The market for wireless modules has grown as customers search for solutions that provide turnkey wireless connectivity for their products. The development of modules is difficult due to stringent requirements, including high levels of integration, programmability, performance, reliability, security and power efficiency. In addition, designs must meet numerous wireless standards deployed in various environments and serving diverse requirements.

Our combined expertise in IC design and software development allows us to engineer modules that provide robust, high-performance connections in challenging wireless environments. We have developed wireless modules based on numerous wireless standards, including Z-Wave, Bluetooth, Zigbee, Thread, Wi-Fi and sub-GHz. We believe our demonstrated proficiency in the design of modules provides our customers with significant advantages such as fast time to market, reduced development cost, global wireless certifications and software reuse.

7

Table of Contents

Silicon-to-Cloud Security Integration Expertise

Security is of paramount importance to our customers. More than ever before, device manufacturers and OEMs developing IoT products have specific needs to ensure their solutions are secure. Security is a complex endeavor involving the convergence of multiple integrated hardware and software technologies. IoT products are designed to ensure the devices operate in a trusted and reliable manner, enforce policies as well as protect the confidentiality, authenticity and integrity of data and private information being processed and transmitted. The building blocks are built in hardware based on dedicated IC security components integrated into SoC designs. These specialized security components are designed to enhance cryptographic capabilities and exploit unique physical characteristics of CMOS to establish foundations of trust and enable device identity and assurance.

In addition to developing specific security hardware and software capabilities, we also focus design and engineering efforts on technologies that simplify and accelerate adoption by customers of security features engineered into our silicon chips. This is primarily achieved through software tools such as Simplicity Studio and its integration with cloud-based services that simplify implementation, reduce complexity and enable management of security for fleets of devices. Those capabilities are designed to help customers develop products and solutions with chip-to-cloud security integration, enable faster time to market and reduce security defects, risks and losses due to security attacks and incidents. We are creating innovative security solutions that enable customers to develop best-in-class, simple and economical solutions. We will continue investing in security-specific research and development that addresses a dynamic threat landscape, emerging regulatory requirements, and evolving customer security and privacy needs.

Understanding of Systems Technology and Trends

Our focused expertise in mixed-signal ICs is the result of the breadth of engineering talent we have assembled with experience working in analog-intensive CMOS design for a wide variety of applications. This expertise, which we consider a competitive advantage, is the foundation of our in-depth understanding of the technology and trends that impact electronic systems and markets. Our expertise includes:

Our understanding of the role of analog/digital interfaces within electronic systems, standards evolution, and end market drivers enables us to identify product development opportunities and capitalize on market trends.

Manufacturing

As a fabless semiconductor company, we conduct IC design and development in our facilities and electronically transfer our proprietary IC designs to third-party semiconductor fabricators who process silicon wafers to produce the ICs that we design. Our IC designs typically use industry-standard CMOS manufacturing process technology to achieve a level of performance normally associated with more expensive special-purpose IC fabrication technology. We believe the use of CMOS technology facilitates the rapid production of our ICs within a lower cost framework. Our IC production employs submicron process geometries which are readily available from leading foundry suppliers worldwide, thus increasing the likelihood that manufacturing capacity will be available throughout our products’ life cycles. We currently partner primarily with Taiwan Semiconductor Manufacturing Co. (TSMC) and Semiconductor Manufacturing International Corporation (SMIC) to manufacture the majority of our semiconductor wafers. We believe that our fabless manufacturing model significantly reduces our capital requirements and allows us to focus our resources on design, development and marketing of our ICs.

Once the silicon wafers have been produced, they are shipped directly to our third-party assembly subcontractors. The assembled ICs are then moved to the final testing stage. This operation can be performed by the same contractor that assembled the IC, other third-party test subcontractors or within our internal facilities prior to shipping to our customers. During fiscal 2022, most of our units shipped were tested by offshore third-party test subcontractors. We expect that our utilization of offshore third-party test subcontractors will remain substantial during fiscal 2023.

8

Table of Contents

The impacts of the COVID-19 pandemic on our suppliers are uncertain, evolving and dependent on numerous unpredictable factors outside of our control. If our suppliers experience closures or reductions in their capacity utilization levels in the future, we may have difficulty sourcing materials necessary to fulfill production requirements. Disruptions to our business and supply chain (and the business and supply chains of our customers) could cause significant delays in shipments of our products until we are able to shift our manufacturing, assembling or testing from the affected subcontractor to another third-party vendor. Capacity is currently limited at certain of our third-party foundry, assembly and test subcontractors due to a spike in semiconductor demand.

Backlog

We include in backlog accepted product purchase orders from customers and worldwide distributor stocking orders. Product orders in our backlog are subject to changes in delivery schedules or cancellation at the option of the purchaser typically without penalty. Our backlog may fluctuate significantly depending upon customer order patterns which may, in turn, vary considerably based on rapidly changing business circumstances. Accordingly, we do not believe that our backlog at any time is necessarily representative of actual sales for any succeeding period.

Competition

The markets for semiconductors generally, and for analog and mixed-signal ICs in particular, are intensely competitive. We anticipate that the market for our products will continually evolve and will be subject to rapid technological change. We believe the principal competitive factors in our industry are:

​

We believe that we are competitive with respect to these factors, particularly because our ICs typically are smaller in size, are highly integrated, achieve high performance specifications at lower price points than competitive products and are manufactured in standard CMOS which generally enables us to supply them on a relatively rapid basis to customers to meet their product introduction schedules. However, disadvantages we face include our relatively short operating history in certain of our markets and the need for customers to redesign their products and modify their software to implement our ICs in their products.

Due to our diversified product portfolio and the numerous markets and applications we serve, we target a relatively large number of competitors. We compete with Broadcom, Espressif, Infineon, MediaTek, Microchip, Nordic Semiconductor, NXP, Qualcomm, Renesas, STMicroelectronics, Synaptics, Telink, Texas Instruments and others. We expect to face competition in the future from our current competitors, other manufacturers and designers of semiconductors and start-up semiconductor design companies. Our competitors may also offer bundled solutions offering a more complete product, which may negatively impact our competitive position despite the technical merits or advantages of our products. In addition, our customers could develop products or technologies internally that would replace their need for our products and would become a source of competition. We could also face competition from module makers or other systems suppliers that may include mixed-signal components in their products that could eliminate the need for our ICs.

Many of our competitors and potential competitors have longer operating histories, greater name recognition, access to larger customer bases, complementary product offerings, and significantly greater financial, sales and marketing, manufacturing, distribution, technical and other resources than us. Current and potential competitors have established or may establish financial and strategic relationships between themselves or with our existing or potential customers, resellers or other third parties. Accordingly, it is possible that new competitors or alliances among competitors could emerge and rapidly acquire significant market share.

9

Table of Contents

Intellectual Property

Our future success depends in part upon our proprietary technology. We seek to protect our technology through a combination of patents, copyrights, trade secrets, trademarks and confidentiality procedures. As of December 31, 2022, we had 1,459 issued or pending United States and foreign patents. Patents generally have a term of twenty years from the date they are filed. As our patent portfolio has been built over time, the remaining terms of the individual patents in our patent portfolio vary. There can be no assurance that patents will ever be issued with respect to our patent applications. Furthermore, it is possible that any patents held by us may be invalidated, circumvented, challenged or licensed to others. In addition, there can be no assurance that such patents will provide us with competitive advantages or adequately safeguard our proprietary rights. While we continue to file new patent applications with respect to our recent developments, existing patents are granted for prescribed time periods and will expire at various times in the future.

We claim copyright protection for proprietary documentation for our products. We have filed for registration, or are in the process of filing for registration, the visual images of certain ICs with the U.S. Copyright Office. We have registered the “Silicon Labs” logo and a variety of other product and product family names as trademarks in the United States and selected foreign jurisdictions. All other trademarks, service marks or trade names appearing in this report are the property of their respective owners. We also attempt to protect our trade secrets and other proprietary information through agreements with our customers, suppliers, employees and consultants, and through other customary security measures. We intend to protect our rights vigorously, but there can be no assurance that our efforts will be successful. In addition, the laws of other countries in which our products are sold may not protect our products and intellectual property rights to the same extent as the laws of the United States.

While our ability to effectively compete depends in large part on our ability to protect our intellectual property, we believe that our technical expertise and ability to introduce new products in a timely manner will be an important factor in maintaining our competitive position.

Many participants in the semiconductor and electronics industries have a significant number of patents and have frequently demonstrated a readiness to commence litigation based on allegations of patent and other intellectual property infringement. From time to time, third parties may assert infringement claims against us. We may not prevail in any such litigation or may not be able to license any valid and infringed patents from third parties on commercially reasonable terms, if at all. Litigation, regardless of the outcome, is likely to result in substantial cost and diversion of our resources, including our management’s time. Any such litigation could materially adversely affect us.

Our licenses include industry standard licenses with our vendors, such as wafer fabrication tool libraries, third-party core libraries, computer-aided design applications and business software applications.

Human Capital

Our success depends on our ability to continue to attract, retain and motivate qualified employees, particularly highly skilled analog and mixed-signal engineers and senior management personnel. We strive to meet this objective by offering competitive compensation and benefits in a diverse, inclusive, equitable and safe workplace, with opportunities for our employees to grow and develop in their careers.

As of December 31, 2022, we employed 1,964 people, of whom 67% were in engineering roles. Women represented 22% of our workforce and men represented 78%. We are a multi-national and multi-ethnic workforce, with sites and employees in more than a dozen countries. We are committed to fostering a diverse and inclusive workplace that attracts and retains exceptional talent. We actively promote representation in our organization and equity in our recruitment, development, promotion and compensation practices. We have focused attention on improving our environmental, social and governance (“ESG”) metrics. We included diversity, equity and inclusion (“DEI”) metrics as a component of senior management bonuses for fiscal 2022. These principles are also reflected in our employee training, in particular with respect to our policies against harassment, discrimination and the elimination of bias in the workplace.

We hold our employees to high performance standards and our compensation plans are designed to deliver competitive base pay and attractive incentive opportunities. Our benefits programs are tailored to the various countries in which we operate. We benchmark for market practices, and regularly review our compensation and benefit programs against the market to ensure they remain competitive.

10

Table of Contents

We support a high-performance culture through learning and development solutions aligned with our strategic priorities. Our approach is business-centric, accessible and inclusive. Employees continuously collaborate and share their expertise through an internal training program consisting of classes and workshops that help strengthen technical and professional skills and advance careers. We also host university professors and external speakers to broaden knowledge, trigger creativity and inspire innovation. Our e-learning libraries and on-demand training videos allow employees to absorb information at their own pace and share their recommendations with co-workers. Employees are invited to attend our annual two-day technical symposium featuring peer-reviewed presentations showcasing our internal technical achievements and talks from outside experts to educate and inspire our workforce. Our talent development programs provide employees with the resources they need to help achieve their career goals, build management skills and lead their organizations. We regularly review succession plans and focus on promoting internal talent to help grow our employees’ careers.

We believe that our future success will be dependent on retaining the services of our key personnel, developing their successors and properly managing the transition of key roles when they occur. Our key technical personnel represent a significant asset and serve as the primary source for our technological and product innovations. We use employee surveys to better understand and improve the employee experience and identify opportunities to continually strengthen our work philosophy. We use employee feedback to drive and improve processes and ensure a deep understanding of our culture and vision among our employees. We believe the development of our company culture, along with competitive compensation, career growth and development opportunities have helped increase employee tenure and reduce voluntary turnover. During fiscal 2022, our voluntary employee turnover rate was 9%.

The health and safety of our employees is of utmost important to us. We offer comprehensive benefits to protect the health of our employees and their families as well as their way of life. We provide our employees and their families with access to a variety of innovative, flexible and convenient health and wellness programs that support their physical and mental health by providing tools and resources to help them improve or maintain their health status. We have taken additional health and safety measures due to the COVID-19 pandemic and will continue to adjust these as needed based upon health authority guidelines.

Corporate Social Responsibility

As a global corporate citizen, we are committed to advancing responsible and sustainable operations throughout our supply chain. We live by our promise to “do the right thing” for our employees, customers, shareholders, communities, and the planet. We strive to minimize resource use and reduce our environmental impact by designing smaller and more energy-efficient products, conserving energy and precious resources, and investing in sustainable technologies and energy conservation practices. We believe our products enable sustainable IoT solutions across home, medical, industrial and commercial environments, including air pollution and waste management monitoring, water integrity, residential irrigation monitoring, street lighting networks, advanced metering infrastructure and building energy management. Innovative solutions don’t stop at our products – we are also actively supporting research to improve safety, sustainability, and overall quality of life in densifying cities as the founding corporate partner for the Smart City Living Lab at The International Institute of Information Technology in Hyderabad, India.

We demand excellence in our quality and environmental management systems, each respectively certified to ISO 9001:2015 and ISO 14001:2015 standards. We strive to deliver products that meet environmental regulations and requirements and have high standards for our global supply chain partners, prioritizing qualified suppliers who are socially and environmentally progressive. In 2022, we joined the Responsible Business Alliance® (“RBA®”), an industry coalition dedicated to responsible business conduct in the global supply chain. We support, and require our suppliers to support, the RBA Code of Conduct.

Each year we donate a portion of our annual profits to charitable organizations, allocating global site grants to support local community needs, and providing corporate matching gifts for our US-based employees. We also offer 24 hours of paid time off annually for employees to volunteer in their communities. Our philanthropy program prioritizes financial, volunteer and in-kind support to organizations that are helping to expand technology access and education to underrepresented groups, support advancements in sustainability and energy conservation, and invest in critical community needs where we work and live.

For more information on our ESG commitments and progress, please visit the Environmental, Social and Governance (“ESG”) section of our website at www.silabs.com. Our website and the information contained therein or connected thereto are not intended to be incorporated into this Annual Report on Form 10-K.

11

Table of Contents

Governmental Regulations

We are subject to international, federal, state and local regulations that are customary to businesses in the semiconductor industry. Such regulations include:

Our compliance with these laws and regulations has not had a material impact on our financial position or results of operations.

Available Information

Our website address is www.silabs.com. Our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available through the investor relations page of our website free of charge as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (SEC). Our website and the information contained therein or connected thereto are not intended to be incorporated into this Annual Report on Form 10-K.

​

Item 1A.    Risk Factors

Global Business Risks

We rely on third parties to manufacture, assemble and test our products, which subjects us to risks of disruptions in our supply chain

We do not have our own wafer fab manufacturing facilities. Therefore, we rely on third-party vendors to manufacture the products we design. We also currently rely on third-party assembly subcontractors in Asia to assemble and package the silicon chips provided by the wafers for use in final products. Additionally, we rely on these offshore subcontractors for a substantial portion of the testing requirements of our products prior to shipping. We expect utilization of third-party subcontractors to continue in the future.

The cyclical nature of the semiconductor industry drives wide fluctuations in available capacity at third-party vendors. On occasion, we have been unable to adequately respond to unexpected increases in customer demand due to capacity constraints and, therefore, were unable to benefit from this incremental demand. We may be unable to obtain adequate foundry, assembly or test capacity from our third-party subcontractors to meet our customers’ delivery requirements even if we adequately forecast customer demand. For example, foundry, assembly and test capacity is currently limited due to a spike in semiconductor demand. As a result, we have recently experienced longer lead times at certain third-party foundry subcontractors. This is resulting in competing demand for capacity at our suppliers. Such conditions may adversely affect our revenue and increase our costs.

There are significant risks associated with relying on these third-party foundries and subcontractors, including:

12

Table of Contents

We typically do not have long-term supply contracts with our third-party vendors which obligate the vendor to perform services and supply products to us for a specific period, in specific quantities, and at specific prices. Our third-party foundry, assembly and test subcontractors typically do not guarantee that adequate capacity will be available to us within the time required to meet demand for our products. In the event that these vendors fail to meet our demand for whatever reason, we expect that it would take up to 12 months to transition performance of these services to new providers. Such a transition may also require qualification of the new providers by our customers or their end customers.

If our suppliers experience closures or reductions in their capacity utilization levels in the future, we may have difficulty sourcing materials necessary to fulfill production requirements. Public health crises, such as the COVID-19 pandemic, may affect our suppliers’ production capabilities as a result of quarantines, closures of production facilities, lack of supplies or delays caused by restrictions on travel.

Most of the silicon wafers for the products that we have sold were manufactured either by Taiwan Semiconductor Manufacturing Co. (TSMC) or Semiconductor Manufacturing International Corporation (SMIC). Our customers typically complete their own qualification process. If we fail to properly balance customer demand across the existing semiconductor fabrication facilities that we utilize or are required by our foundry partners to increase, or otherwise change the number of fab lines that we utilize for our production, we might not be able to fulfill demand for our products and may need to divert our engineering resources away from new product development initiatives to support the fab line transition, which would adversely affect our operating results. In addition, geopolitical changes in China-Taiwan relations could disrupt TSMC’s operations and impact our third-party assembly subcontractors in Asia. Such a disruption could severely impact our ability to manufacture the majority of our products and as a result, could adversely affect our business, revenues and results of operations.

We are subject to the cyclical nature of the semiconductor industry, which has been subject to significant fluctuations

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards, short product life cycles and wide fluctuations in product supply and demand. The industry has experienced significant fluctuations, often connected with, or in anticipation of, maturing product cycles and new product introductions of both semiconductor companies’ and their customers’ products and fluctuations in general economic conditions. Deteriorating general worldwide economic conditions, including reduced economic activity, concerns about credit, interest rates and inflation, increased energy costs, decreased consumer confidence, reduced corporate profits, decreased spending and similar adverse business conditions, would make it very difficult for our customers, our vendors, and us to accurately forecast and plan future business activities and could cause U.S. and foreign businesses to slow spending on our products. In recent months, inflation and interest rates have increased significantly. Such pressures could impact demand for our customers’ end products and increase our costs. If our costs become subject to significant inflationary pressures, we may not be able to fully offset such higher costs with increased revenues. We cannot predict the timing, strength, or duration of any economic slowdown or economic recovery. If the economy or markets in which we operate deteriorate, our business, financial condition, and results of operations would likely be materially and adversely affected.

Downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. Upturns have been characterized by increased product demand and production capacity constraints created by increased competition for access to third-party foundry, assembly and test capacity. We are dependent on the availability of such capacity to manufacture, assemble and test our products. Foundry, assembly and test capacity is currently limited due to a spike in semiconductor demand. None of our third-party foundry, assembly or test subcontractors have provided assurances that adequate capacity will be available to us. The semiconductor industry has recently experienced an economic up-cycle. This recent up-cycle could be followed by a downturn, and historically, such down-cycles have resulted in a decline in overall GDP performance and greater overall uncertainty regarding the economy. If such a downturn occurs, it could have a material adverse effect on our business and operating results.

In addition, the COVID-19 pandemic has caused further global economic uncertainty. The impact from the rapidly changing market and economic conditions due to the COVID-19 outbreak is uncertain, disrupting the business of our customers and suppliers, and could impact our business and operating results in the future.

13

Table of Contents

We are a global company, which subjects us to additional business risks including logistical and financial complexity, supply disruption, political instability and currency fluctuations

We have established international subsidiaries and have opened offices in international markets to support our activities in Asia, the Americas and Europe. This has included the establishment of a headquarters in Singapore for non-U.S. operations. During fiscal 2022, the percentage of our revenues derived from outside of the United States was 83% (and the revenue associated with end customers in China was 14%, and revenue attributed to China based on shipped-to location was 33%). We may not be able to maintain or increase global market demand for our products. Our international operations are subject to a number of risks, including:

To date, substantially all of our sales to international customers and purchases of components from international suppliers have been denominated in U.S. dollars. As a result, an increase in the value of the U.S. dollar relative to foreign currencies could make our products more expensive for our international customers to purchase, thus rendering our products less competitive. Similarly, a decrease in the value of the U.S. dollar could reduce our buying power with respect to international suppliers.

14

Table of Contents

Most of our current manufacturers, assemblers, test service providers, distributors and customers are concentrated in the same geographic region, which increases the risk that a natural disaster, epidemic, labor strike, war or political unrest could disrupt our operations or sales

Most of our foundries and several of our assembly and test subcontractors’ sites are located in Taiwan and most of our other foundry, assembly and test subcontractors are located in the Pacific Rim region. In addition, many of our customers are located in the Pacific Rim region. The risk of earthquakes in Taiwan and the Pacific Rim region is significant due to the proximity of major earthquake fault lines in the area. Earthquakes, tsunamis, fire, flooding, lack of water or other natural disasters, an epidemic such as the current COVID-19 outbreak, political unrest, war, labor strikes or work stoppages in countries where our semiconductor manufacturers, assemblers and test subcontractors are located, likely would result in the disruption of our foundry, assembly or test capacity. There can be no assurance that alternate capacity could be obtained on favorable terms, if at all.

A natural disaster, epidemic, labor strike, war or political unrest where our customers’ facilities are located would likely reduce our sales to such customers. In addition, a significant portion of the assembly and testing of our products occurs in South Korea. Any disruption resulting from these events, including the COVID-19 pandemic, could also cause significant delays in shipments of our products until we are able to shift our manufacturing, assembling or testing from the affected subcontractor to another third-party vendor. If the COVID-19 pandemic significantly disrupts the manufacture, shipment and sales of our products or the products of our customers, this may materially negatively impact our operating results for subsequent periods. For example, if travel restrictions or business shutdowns or slowdowns occur for an extended period of time in Taiwan, South Korea or the other countries in which our current manufacturers, assemblers, test service providers, distributors and customers are located, we may experience delays in product production, a decreased ability to support our customers, reduced design win activity, and overall lack of productivity. Our customers may also experience closures of their manufacturing facilities or inability to obtain other components, either of which could negatively impact demand for our solutions.

We have limited resources compared to some of our current and potential competitors and we may not be able to compete effectively and increase market share

Some of our current and potential competitors have longer operating histories, significantly greater resources and name recognition and a larger base of customers than we have. As a result, these competitors may have greater credibility with our existing and potential customers. They also may be able to adopt more aggressive pricing policies and devote greater resources to the development, promotion and sale of their products than we can to ours. In addition, some of our current and potential competitors have already established supplier or joint development relationships with the decision makers at our current or potential customers. These competitors may be able to leverage their existing relationships to discourage their customers from purchasing products from us or persuade them to replace our products with their products. Our competitors may also offer bundled solutions offering a more complete product despite the technical merits or advantages of our products. These competitors may elect not to support our products which could complicate our sales efforts. We also face increased competition as a result of China actively promoting its domestic semiconductor industry through policy changes and investment. These actions, as well as China-U.S. trade barriers, may restrict our participation in the China market or may prevent us from competing effectively with Chinese companies or companies from other countries that China favors over the United States. Furthermore, our current or potential competitors may be acquired by third parties with greater available resources and the ability to initiate or withstand substantial price competition, which may include price concessions, delayed payment terms, financing terms, or other terms and conditions that are more enticing to potential customers. These and other competitive pressures may prevent us from competing successfully against current or future competitors, and may materially harm our business. Competition could decrease our prices, reduce our sales, lower our gross profit and/or decrease our market share.

15

Table of Contents

Competition within the numerous markets we target may reduce sales of our products and reduce our market share

The markets for semiconductors in general, and for mixed-signal products in particular, are intensely competitive. We expect that the market for our products will continually evolve and will be subject to rapid technological change. In addition, as we target and supply products to numerous markets and applications, we face competition from a relatively large number of competitors. We compete with Broadcom, Espressif, Infineon, MediaTek, Microchip, Nordic Semiconductor, NXP, Qualcomm, Renesas, STMicroelectronics, Synaptics, Telink, Texas Instruments and others. We expect to face competition in the future from our current competitors, other manufacturers and designers of semiconductors, and start-up semiconductor design companies. As the markets for communications products grow, we also may face competition from traditional communications device companies. These companies may enter the mixed-signal semiconductor market by introducing their own products or by entering into strategic relationships with or acquiring other existing providers of semiconductor products. In addition, large companies may restructure their operations to create separate companies or may acquire new businesses that are focused on providing the types of products we produce or acquire our customers.

Our inability to manage growth could materially and adversely affect our business

Our past growth has placed, and any future growth of our operations will continue to place, a significant strain on our management personnel, systems and resources. We anticipate that we will need to implement a variety of new and upgraded sales, operational and financial enterprise-wide systems, information technology infrastructure, procedures and controls, including the improvement of our accounting and other internal management systems to manage this growth and maintain compliance with regulatory guidelines, including Sarbanes-Oxley Act requirements. To the extent our business grows, our internal management systems and processes will need to improve to ensure that we remain in compliance. We also expect that we will need to continue to expand, train, manage and motivate our workforce. All of these endeavors will require substantial management effort, and we anticipate that we will require additional management personnel and internal processes to manage these efforts and to plan for the succession from time to time of certain persons who have been key management and technical personnel. If we are unable to effectively manage our expanding global operations, including our international headquarters in Singapore, our business could be materially and adversely affected.

We may be the victim of business disruptions and security breaches, including cyber-attacks, which could lead to liability or could damage our reputation and financial results

Information technology system and/or network disruptions, regardless of the cause, but including acts of sabotage, error, or other actions, could harm the company’s operations. Failure to effectively prevent, detect, and recover from security breaches, including cyber-attacks, could result in the misuse of company assets, disruption to the company, diversion of management resources, regulatory inquiries, legal claims or proceedings, reputational damage, loss of sales and other costs to the company. We routinely face attacks that attempt to breach our security protocols, gain access to or disrupt our computerized systems or steal proprietary company, customer, partner or employee information. These attacks are sometimes successful. These attacks may be due to security breaches, employee error, theft, malfeasance, phishing schemes, ransomware, faulty password or data security management, or other irregularities. The theft, loss, destruction, unavailability or misuse of personal or business data collected, used, stored or transferred by us to run our business could result in increased security costs or costs related to defending legal claims. Industrial espionage, theft or loss of our intellectual property data could lead to counterfeit products or harm the competitive position of our products and services. Costs to implement, test and maintain measures to promote compliance with applicable privacy and data security laws as well as to protect the overall security of our system have been and are expected to continue to be significant. Attempted or successful attacks against our products and services could damage our reputation with customers or users and reduce demand for our products and services.

Additionally, there is an increased risk that we may experience cybersecurity-related events such as COVID-19 themed phishing attacks and other security challenges as a result of most of our employees and our service providers working remotely from non-corporate managed networks during the ongoing COVID-19 pandemic and potentially continuing working remotely even after the COVID-19 pandemic has subsided.

16

Table of Contents

In addition, the risk of cyber-attacks has increased in connection with the military conflict between Russia and Ukraine and the resulting geopolitical conflict. In light of those and other geopolitical events, nation-state actors or their supporters may launch retaliatory cyber-attacks, and may attempt to cause supply chain and other third-party service provider disruptions, or take other geopolitically motivated retaliatory actions that may disrupt our business operations, result in data compromise, or both. Nation-state actors have in the past carried out, and may in the future carry out, cyber-attacks to achieve their aims and goals, which may include espionage, information operations, monetary gain, ransomware, disruption, and destruction. In February 2022, the U.S. Cybersecurity and Infrastructure Security Agency issued a “Shields Up” alert for American organizations noting the potential for Russia’s cyber-attacks on Ukrainian government and critical infrastructure organizations to impact organizations both within and beyond the United States, particularly in the wake of sanctions imposed by the United States and its allies. These circumstances increase the likelihood of cyber-attacks and/or security breaches.

We may be subject to information technology failures that could damage our reputation, business operations and financial condition

We rely on information technology for the effective operation of our business. Our systems are subject to damage or interruption from a number of potential sources, including natural disasters, accidents, power disruptions, telecommunications failures, acts of terrorism or war, computer viruses, theft, physical or electronic break-ins, cyber-attacks, sabotage, vandalism, or similar events or disruptions. Our security measures may not detect or prevent such security breaches. Any such compromise of our information security could result in the theft or unauthorized publication or use of our confidential business or proprietary information, result in the unauthorized release of customer, supplier or employee data, result in a violation of privacy or other laws, expose us to a risk of litigation or damage our reputation. In addition, our inability to use or access information systems at critical points in time could unfavorably impact the timely and efficient operation of our business, which could negatively affect our business and operating results.

Third parties with which we conduct business, such as foundries, assembly and test contractors, distributors and customers, have access to certain portions of our sensitive data. In the event that these third parties do not properly safeguard our data that they hold, security breaches could result and negatively impact our reputation, business operations and financial results. Additionally, a successful cyber-attack against one of these third-parties’ information technology systems may disrupt our supply chain.

We may not be able to maintain our historical growth and may experience significant period-to-period fluctuations in our revenues and operating results, which may result in volatility in our stock price

Although we have generally experienced revenue growth in our history, we may not be able to sustain this growth. We may also experience significant period-to-period fluctuations in our revenues and operating results in the future due to a number of factors, and any such variations may cause our stock price to fluctuate. In some future period our revenues or operating results may be below the expectations of public market analysts or investors. If this occurs, our stock price may drop, perhaps significantly.

A number of factors, in addition to those cited in other risk factors applicable to our business, may contribute to fluctuations in our revenues and operating results, including:

17

Table of Contents

The markets for consumer electronics, for example, are characterized by rapid fluctuations in demand and seasonality that result in corresponding fluctuations in the demand for our products that are incorporated in such devices. Additionally, the rate of technology acceptance by our customers results in fluctuating demand for our products as customers are reluctant to incorporate a new IC into their products until the new IC has achieved market acceptance. Once a new IC achieves market acceptance, demand for the new IC can quickly accelerate to a point and then level off such that rapid historical growth in sales of a product should not be viewed as indicative of continued future growth. In addition, demand can quickly decline for a product when a new IC product is introduced and receives market acceptance. Due to the various factors mentioned above, the results of any prior quarterly or annual periods should not be relied upon as an indication of our future operating performance.

Our research and development efforts are focused on a limited number of new technologies and products, and any delay in the development, or abandonment, of these technologies or products by industry participants, or their failure to achieve market acceptance, could compromise our competitive position

Our products serve as components and solutions in electronic devices in various markets. As a result, we have devoted and expect to continue to devote a large amount of resources to develop products based on new and emerging technologies and standards that will be commercially introduced in the future. Research and development expense during fiscal 2022 was $332.3 million, or 32.5% of revenues. A number of companies are actively involved in the development of these new technologies and standards. Should any of these companies delay or abandon their efforts to develop commercially available products based on new technologies and standards, our research and development efforts with respect to these technologies and standards likely would have no appreciable value. In addition, if we do not correctly anticipate new technologies and standards, or if the products that we develop based on these new technologies and standards fail to achieve market acceptance, our competitors may be better able to address market demand than we would. Furthermore, if markets for these new technologies and standards develop later than we anticipate, or do not develop at all, demand for our products that are currently in development would suffer, resulting in lower sales of these products than we currently anticipate.

We depend on our key personnel to manage our business effectively in a rapidly changing market, and if we are unable to retain our current personnel and hire additional personnel, our ability to develop and successfully market our products could be harmed

We believe our future success will depend in large part upon our ability to attract and retain highly skilled managerial, engineering, sales and marketing personnel. We believe that our future success will be dependent on retaining the services of our key personnel, developing their successors and certain internal processes to reduce our reliance on specific individuals, and on properly managing the transition of key roles when they occur. There is currently a shortage of qualified personnel with significant experience in the design, development, manufacturing, marketing and sales of analog and mixed-signal products. In particular, there is a shortage of engineers who are familiar with the intricacies of the design and manufacturability of analog elements, and competition for such personnel is intense. Our key technical personnel represent a significant asset and serve as the primary source for our technological and product innovations. We may not be successful in attracting and retaining sufficient numbers of technical personnel to support our anticipated growth. The loss of any of our key employees or the inability to attract or retain qualified personnel both in the United States and internationally, including engineers, sales, applications and marketing personnel, could delay the development and introduction of, and negatively impact our ability to sell, our products.

18

Table of Contents

If we are unable to develop or acquire new and enhanced products that achieve market acceptance in a timely manner, our operating results and competitive position could be harmed

Our future success will depend on our ability to develop or acquire new products and product enhancements that achieve market acceptance in a timely and cost-effective manner. The development of mixed-signal ICs is highly complex, and we have at times experienced delays in completing the development and introduction of new products and product enhancements. Successful product development and market acceptance of our products depend on a number of factors, including:

We cannot provide any assurance that products which we recently have developed or may develop in the future will achieve market acceptance. We have introduced to market or are in development of many products. If our products fail to achieve market acceptance, or if we fail to develop new products on a timely basis that achieve market acceptance, our growth prospects, operating results and competitive position could be adversely affected. The growth of the IoT market is dependent on the adoption of industry standards to permit devices to connect and communicate with each other. If the industry cannot agree on a common set of standards, then the growth of the IoT market may be slower than expected.

Any acquisitions we make could disrupt our business and harm our financial condition

As part of our growth and product diversification strategy, we continue to evaluate opportunities to acquire other businesses, intellectual property or technologies that would complement our current offerings, expand the breadth of our markets or enhance our technical capabilities. The acquisitions that we have made and may make in the future entail a number of risks that could materially and adversely affect our business and operating results, including:

In particular, the extent of the impact of the COVID-19 pandemic on our ability to complete and integrate any future acquisition into our business is unpredictable and will depend on future developments, including the duration, severity and spread of the pandemic, related restrictions on travel and transportation, and other actions that may be taken by governmental authorities. Future acquisitions also could cause us to incur debt or contingent liabilities or cause us to issue equity securities that could negatively impact the ownership percentages of existing shareholders.

19

Table of Contents

The average selling prices of our products could decrease rapidly which may negatively impact our revenues and gross profit

We may experience substantial period-to-period fluctuations in future operating results due to the erosion of our average selling prices. In the past, we have reduced the average unit price of our products in anticipation of or in response to competitive pricing pressures, new product introductions by us or our competitors and other factors. If we are unable to offset any such reductions in our average selling prices by increasing our sales volumes, increasing our sales content per application or reducing production costs, our gross profit and revenues will suffer. To maintain our gross profit, we will need to develop and introduce new products and product enhancements on a timely basis and continually reduce our costs. Our failure to do so could cause our revenues and gross profit to decline.

Failure to manage our distribution channel relationships could impede our future growth

The future growth of our business will depend in large part on our ability to manage our relationships with current and future distributors and sales representatives, develop additional channels for the distribution and sale of our products and manage these relationships. During fiscal 2022, 81% of our revenue was derived from distributors (and 49% of our revenue was derived from our two largest distributors). As we execute our indirect sales strategy, we must manage the potential conflicts that may arise with our direct sales efforts. For example, conflicts with a distributor may arise when a customer begins purchasing directly from us rather than through the distributor. The inability to successfully execute or manage a multi-channel sales strategy could impede our future growth. In addition, relationships with our distributors often involve the use of price protection and inventory return rights. This often requires a significant amount of sales management’s time and system resources to manage properly.

We do not have long-term commitments from our customers

Our customers regularly evaluate alternative sources of supply in order to diversify their supplier base, which increases their negotiating leverage with us and protects their ability to secure these components. We believe that any expansion of our customers’ supplier bases could have an adverse effect on the prices we are able to charge and volume of product that we are able to sell to our customers, which would negatively affect our revenues and operating results.

Customers may decide not to purchase our products at all, purchase fewer products than they did in the past, or alter their purchasing patterns, particularly because:

We are subject to increased inventory risks and costs because we build our products based on forecasts provided by customers before receiving purchase orders for the products

In order to ensure availability of our products for some of our largest customers, we start the manufacturing of our products in advance of receiving purchase orders based on forecasts provided by these customers. However, these forecasts do not represent binding purchase commitments and we do not recognize sales for these products until they are shipped to the customer. As a result, we incur inventory and manufacturing costs in advance of anticipated sales. Because demand for our products may not materialize, manufacturing based on forecasts subjects us to increased risks of high inventory carrying costs, increased obsolescence and increased operating costs. These inventory risks are exacerbated when our customers purchase indirectly through contract manufacturers or hold component inventory levels greater than their consumption rate because this causes us to have less visibility regarding the accumulated levels of inventory for such customers. A resulting write-off of unusable or excess inventories would adversely affect our operating results.

20

Table of Contents

The COVID-19 pandemic could adversely affect our business, results of operations, and financial condition

The COVID-19 pandemic has negatively impacted the global economy, disrupted global supply chains and created significant volatility and disruption of financial markets. The extent of the impact of the COVID-19 pandemic on our operational and financial performance will depend on future developments, including the duration, severity and spread of the pandemic, related restrictions on travel and transportation and other actions that may be taken by governmental authorities, the impact to the business of our suppliers or customers and other items identified in our risk factors, all of which are uncertain and cannot be predicted.

The impacts of the COVID-19 pandemic, or a similar public health crisis, on our business, customers, suppliers, employees, markets and financial results and condition are uncertain, evolving and dependent on numerous unpredictable factors outside of our control, including:

There can be no assurance that any decrease in sales resulting from the COVID-19 pandemic or a similar public health crisis will be offset by increased sales in subsequent periods. Even after the COVID-19 pandemic or a similar public health crisis has subsided, we may continue to experience materially adverse impacts to our business as a result of its global economic impact, including any recession, economic downturn or increased unemployment that has occurred or may occur in the future. An extended period of global supply chain and economic disruption could materially affect our business, results of operations, access to sources of liquidity and financial condition.

Our products are complex and may contain errors which could lead to liability, an increase in our costs and/or a reduction in our revenues

Our products are complex and may contain errors, particularly when first introduced and/or when new versions are released. Our products are increasingly designed in more complex processes, including higher levels of software and hardware integration in modules and system-level solutions and/or include elements provided by third parties which further increase the risk of errors. We rely primarily on our in-house testing personnel to design test operations and procedures to detect any errors or vulnerabilities prior to delivery of our products to our customers.

Should problems occur in the operation or performance of our products, we may experience delays in meeting key introduction dates or scheduled delivery dates to our customers. These errors could also cause significant re-engineering costs, the diversion of our engineering personnel’s attention from our product development efforts and cause significant customer relations and business reputation problems. Any defects could result in refunds, product replacement, product recall or other liability. Any of the foregoing could impose substantial costs and harm our business.

21

Table of Contents

Product liability, data breach or cyber liability claims may be asserted with respect to our products. Many of our products focus on wireless connectivity and the IoT market and such connectivity may make these products particularly susceptible to cyber-attacks. Our products are typically sold at prices that are significantly lower than the cost of the end-products into which they are incorporated. A defect, failure or vulnerability in our product could cause failure in our customer’s end-product, so we could face claims for damages that are disproportionately higher than the revenues and profits we receive from the products involved. Furthermore, product liability risks are particularly significant with respect to medical and automotive applications because of the risk of serious harm to users of these end-products. There can be no assurance that any insurance we maintain will sufficiently protect us from such claims.

Our customers require our products to undergo a lengthy and expensive qualification process without any assurance of product sales

Prior to purchasing our products, our customers require that our products undergo an extensive qualification process, which involves testing of the products in the customer’s system as well as rigorous reliability testing. This qualification process may continue for six months or longer. However, qualification of a product by a customer does not ensure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision to the product or software, changes in the IC’s manufacturing process or the selection of a new supplier by us may require a new qualification process, which may result in delays and in us holding excess or obsolete inventory. After our products are qualified, it can take an additional six months or more before the customer commences volume production of components or devices that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, toward qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, such failure or delay would preclude or delay sales of such product to the customer, which may impede our growth and cause our business to suffer.

We are subject to risks relating to product concentration

We derive a substantial portion of our revenues from a limited number of products, and we expect these products to continue to account for a large percentage of our revenues in the near term. Continued market acceptance of these products, is therefore, critical to our future success. In addition, substantially all of our products that we have sold include technology related to one or more of our issued U.S. patents. If these patents are found to be invalid or unenforceable, our competitors could introduce competitive products that could reduce both the volume and price per unit of our products. Our business, operating results, financial condition and cash flows could therefore be adversely affected by:

Any dispositions could harm our financial condition

Any disposition of a business or product line would entail a number of risks that could materially and adversely affect our business and operating results, including:

22

Table of Contents

The semiconductor manufacturing process is highly complex and, from time to time, manufacturing yields may fall below our expectations, which could result in our inability to satisfy demand for our products in a timely manner and may decrease our gross profit due to higher unit costs

The manufacturing of our products is a highly complex and technologically demanding process. Although we work closely with our foundries and assemblers to minimize the likelihood of reduced manufacturing yields, we have from time to time experienced lower than anticipated manufacturing yields. Changes in manufacturing processes or the inadvertent use of defective or contaminated materials could result in lower than anticipated manufacturing yields or unacceptable performance deficiencies, which could lower our gross profit. If our foundries fail to deliver fabricated silicon wafers of satisfactory quality in a timely manner, we will be unable to meet our customers’ demand for our products in a timely manner, which would adversely affect our operating results and damage our customer relationships.

We depend on our customers to support our products, and some of our customers offer competing products

We rely on our customers to provide hardware, software, intellectual property indemnification and other technical support for the products supplied by our customers. If our customers do not provide the required functionality or if our customers do not provide satisfactory support for their products, the demand for these devices that incorporate our products may diminish or we may otherwise be materially adversely affected. Any reduction in the demand for these devices would significantly reduce our revenues.

In certain products, some of our customers offer their own competitive products. These customers may find it advantageous to support their own offerings in the marketplace in lieu of promoting our products.

Changes in the privacy and data security/protection laws could have an adverse effect on our operations

Federal, state and international privacy-related or data protection laws and regulations could have an adverse effect on our operations. Complying with these laws and the possibility of proceedings against us by governmental entities or others in relation to these laws could increase operational costs. In May 2018, the European Union’s General Data Protection Regulation (“GDPR”) went into effect, replacing the EU’s 1995 Data Protection Directive. The costs of compliance with the GDPR and the potential for fines and penalties in the event of a breach of the GDPR may have an adverse effect on our operations.

Our products must conform to industry standards and technology in order to be accepted by end users in our markets

Generally, our products comprise only a part of a device. All components of such devices must uniformly comply with industry standards in order to operate efficiently together. We depend on companies that provide other components of the devices to support prevailing industry standards. Many of these companies are significantly larger and more influential in affecting industry standards than we are. Some industry standards may not be widely adopted or implemented uniformly, and competing standards may emerge that may be preferred by our customers or end users. If larger companies do not support the same industry standards that we do, or if competing standards emerge, market acceptance of our products could be adversely affected which would harm our business.

Products for certain applications are based on industry standards that are continually evolving. Our ability to compete in the future will depend on our ability to identify and ensure compliance with these evolving industry standards. The emergence of new industry standards could render our products incompatible with products developed by other suppliers. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins. For example, the IoT market is relatively new and is continuously evolving. Furthermore, products in the IoT market frequently require interoperability across multiple standards. We may need to adjust our portfolio to meet the needs of this evolving market through acquisitions or significant new investments in research and development.

Our pursuit of necessary technological advances may require substantial time and expense. We may not be successful in developing or using new technologies or in developing new products or product enhancements that achieve market acceptance. If our products fail to achieve market acceptance, our growth prospects, operating results and competitive position could be adversely affected.

23

Table of Contents

Intellectual Property Risks

Significant litigation over intellectual property in our industry may cause us to become involved in costly and lengthy litigation which could adversely affect our business

The semiconductor and software industries have experienced significant litigation involving patents and other intellectual property rights. From time to time, third parties, including non-practicing entities, allege intellectual property infringement by our products, our customers’ products, or products using technologies or communications standards used in our industry. We also receive communications from customers or suppliers requesting indemnification for allegations brought against them by third parties. Some of these allegations have resulted, and may result in the future, in our involvement in litigation. We have certain contractual obligations to defend and indemnify our customers from certain infringement claims. We also have been involved in litigation to protect our intellectual property rights in the past and may become involved in such litigation again in the future.

Given the unpredictable nature of litigation and the complexity of the technology, we may not prevail in any such litigation. Legal proceedings could subject us to significant liability, invalidate our proprietary rights, or harm our businesses and our ability to compete. Legal proceedings initiated by us to protect our intellectual property rights could also result in counterclaims or countersuits against us. Any litigation, regardless of its outcome or merit, could be time-consuming and expensive to resolve and could divert our management’s time and attention. Intellectual property litigation also could force us to take specific actions, including:

We may be unable to protect our intellectual property, which would negatively affect our ability to compete

Our products rely on our proprietary technology, and we expect that future technological advances made by us will be critical to sustain market acceptance of our products. Therefore, we believe that the protection of our intellectual property rights is and will continue to be important to the success of our business. We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. We also enter into confidentiality or license agreements with our employees, consultants, intellectual property providers and business partners, and control access to and distribution of our documentation and other proprietary information. Despite these efforts, unauthorized parties may attempt to copy or otherwise obtain and use our proprietary technology. Monitoring unauthorized use of our technology is difficult, and we cannot be certain that the steps we have taken will prevent unauthorized use of our technology, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. We cannot be certain that patents will be issued as a result of our pending applications nor can we be certain that any issued patents would protect or benefit us or give us adequate protection from competing products. For example, issued patents may be circumvented or challenged and declared invalid or unenforceable. We also cannot be certain that others will not develop effective competing technologies on their own.

Our products incorporate technology licensed from third parties

We incorporate technology (including software) licensed from third parties in our products. We could be subjected to claims of infringement regardless of our lack of involvement in the development of the licensed technology. Although a third-party licensor is typically obligated to indemnify us if the licensed technology infringes on another party’s intellectual property rights, such indemnification is typically limited in amount and may be worthless if the licensor becomes insolvent. See Significant litigation over intellectual property in our industry may cause us to become involved in costly and lengthy litigation which could seriously harm our business. Furthermore, any failure of third-party technology to perform properly would adversely affect sales of our products incorporating such technology.

24

Table of Contents

Liquidity and Credit Risks

We are subject to credit risks related to our accounts receivable

We do not generally obtain letters of credit or other security for payment from customers, distributors or contract manufacturers. Accordingly, we are not protected against accounts receivable default or bankruptcy by these entities. Our ten largest customers or distributors represent a substantial majority of our accounts receivable. If any such customer or distributor, or a material portion of our smaller customers or distributors, were to become insolvent or otherwise not satisfy their obligations to us, we could be materially harmed.

Our convertible senior notes could adversely affect our operating results and financial condition

On January 2, 2022, we irrevocably elected cash settlement for the principal amount of the 2025 Notes. If we do not have adequate cash available to settle the principal amount of the 2025 Notes, we could seek to raise additional funds through debt or equity capital. However, additional funds may not be available on terms acceptable to us, or at all. We intend to settle any excess value in shares in the event of a conversion. Shares issued to settle any excess value may result in immediate, and potentially material, dilution to the ownership interests of our existing stockholders. Any sales in the public market of our common stock issuable upon such conversion could adversely affect prevailing market prices of our common stock.

The principal balance of the convertible senior notes was separated into liability and equity components, which were recorded initially at fair value. The excess of the principal amount of the liability component over its carrying amount represents the debt discount, which was accreted to interest expense over the term of the notes using the effective interest method. Accordingly, we have reported higher interest expense because of the recognition of both the debt discount amortization and the notes’ coupon interest. With our adoption of Financial Accounting Standards Board (FASB) Accounting Standards Update (ASU) No. 2020-06, Debt—Debt with Conversion and Other Options (Subtopic 470-20) and Derivatives and Hedging— Contracts in Entity’s Own Equity (Subtopic 815-40), in fiscal 2022, the principal balance of the 2025 Notes is no longer separated between liability and equity components. This resulted in an increase to the carrying value of our convertible debt, representing the unamortized debt discount, with an offsetting reduction in stockholders’ equity.

Our debt could adversely affect our operations and financial condition

We believe we have the ability to service our debt, but our ability to make the required payments thereunder when due depends upon our future performance, which will be subject to general economic conditions, industry cycles and other factors affecting our operations, including risk factors described herein, such as the potential implications of the COVID-19 pandemic, many of which are beyond our control. Our credit facility also contains covenants, including financial covenants. If we breach any of the covenants under our credit facility and do not obtain appropriate waivers, then, subject to any applicable cure periods, our outstanding indebtedness thereunder could be declared immediately due and payable.

We could seek to raise additional debt or equity capital in the future, but additional capital may not be available on terms acceptable to us, or at all

We believe that our existing cash, cash equivalents, investments and credit under our credit facility will be sufficient to meet our working capital needs, capital expenditures, investment requirements and commitments for at least the next 12 months. However, our ability to borrow further under the credit facility is dependent upon our ability to satisfy various conditions, covenants and representations. It is possible that we may need to raise additional funds to finance our activities or to facilitate acquisitions of other businesses, products, intellectual property or technologies. We believe we could raise these funds, if needed, by selling equity or debt securities to the public or to selected investors. In addition, even though we may not need additional funds, we may still elect to sell additional equity or debt securities or obtain credit facilities for other reasons. However, we may not be able to obtain additional funds on favorable terms, or at all, particularly during financial market instability related to the COVID-19 pandemic. If we decide to raise additional funds by issuing equity or convertible debt securities, the ownership percentages of existing shareholders would be reduced.

25

Table of Contents

Stock and Governance Risks

Our stock price may be volatile

The market price of our common stock has been volatile in the past and may be volatile in the future. The market price of our common stock may be significantly affected by the following factors:

The stock market has experienced extreme volatility that often has been unrelated to the performance of particular companies. These market fluctuations may cause our stock price to fall regardless of our performance.

Provisions in our charter documents and Delaware law could prevent, delay or impede a change in control of us and may reduce the market price of our common stock

Provisions of our certificate of incorporation and bylaws could have the effect of discouraging, delaying or preventing a merger or acquisition that a stockholder may consider favorable. For example, our certificate of incorporation and bylaws provide for:

We also are subject to the anti-takeover laws of Delaware which may discourage, delay or prevent someone from acquiring or merging with us, which may adversely affect the market price of our common stock.

​

26

Table of Contents

Item 1B.    Unresolved Staff Comments

None.

​

Item 2.    Properties

Our corporate headquarters, housing engineering, sales and marketing, administration and test operations, is located in Austin, Texas. Our headquarters facilities consist of two buildings, which we own, that are located on land which we have leased through 2099. The buildings contain approximately 441,000 square feet of floor space, of which approximately 89,000 square feet were leased to other tenants. In addition to these properties, we lease smaller facilities in various locations in the United States, Canada, China, Denmark, Finland, France, Germany, Hungary, India, Italy, Japan, Norway, Singapore, South Korea, Taiwan and the United Kingdom for engineering, sales and marketing, administrative and manufacturing support activities. We believe that these facilities are suitable and adequate to meet our current operating needs.

Item 3.    Legal Proceedings

Information regarding legal proceedings is provided in Note 13, Commitments and Contingencies, to the Consolidated Financial Statements. Such information is incorporated by reference herein.

​

Item 4.    Mine Safety Disclosures

Not applicable.

​

27

Table of Contents

Part II

Item 5.    Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information and Holders

Our registration statement (Registration No. 333-94853) under the Securities Act of 1933, as amended, relating to our initial public offering of our common stock became effective on March 23, 2000. Our common stock is quoted on the NASDAQ National Market (NASDAQ) under the symbol “SLAB”. As of January 24, 2023, there were 60 holders of record of our common stock.

Dividend Policy

We have never declared or paid any cash dividends on our common stock and we currently do not intend to pay cash dividends. We currently expect to retain any future earnings to fund the operation and expansion of our business.

Stock Performance Graph

The graph depicted below shows a comparison of cumulative total stockholder returns for an investment in Silicon Laboratories Inc. common stock, the NASDAQ Composite Index and the PHLX Semiconductor Index.

​

​

28

Table of Contents

Issuer Purchases of Equity Securities

The following table summarizes repurchases of our common stock during the three months ended December 31, 2022 (in thousands, except per share data):

​

​

Our share repurchase program authorizes repurchases up to $500 million through December 2023. The program allows for repurchases to be made in the open market or in private transactions, including structured or accelerated transactions, subject to applicable legal requirements and market conditions.

​

Item 6.    [Reserved]

​

​

​

​

29

Table of Contents

Item 7.    Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis of financial condition and results of operations should be read in conjunction with the Consolidated Financial Statements and related notes thereto included elsewhere in this report. This discussion contains forward-looking statements. Please see the “Cautionary Statement” and “Risk Factors” above for discussions of the uncertainties, risks and assumptions associated with these statements. Our fiscal year-end financial reporting periods are a 52- or 53-week fiscal year that ends on the Saturday closest to December 31. Fiscal 2022 and 2021 had 52 weeks. Fiscal 2020 had 53 weeks with the extra week occurring in the first quarter of the year. Fiscal 2022, 2021 and 2020 ended on December 31, 2022, January 1, 2022 and January 2, 2021, respectively.

Impact of COVID-19

The COVID-19 pandemic has impacted the global economy, disrupting our operations, global supply chains and the operations of our customers. We implemented a response plan and continued operations while largely transitioning our global workforce to a remote work model. We have reopened offices in all of our locations, subject to local regulations. The third parties that perform our semiconductor manufacturing, assembly, packaging and testing have generally remained operational. The extent of the impact of the COVID-19 pandemic on our operational and financial performance will depend on future developments, including the duration, severity and spread of the pandemic, related restrictions on travel and transportation and other actions that may be taken by governmental authorities, the impact to the business of our suppliers or customers, and other items identified under “Risk Factors” above, all of which are uncertain and cannot be predicted. An extended period of global supply chain and economic disruption could materially affect our business, results of operations, access to sources of liquidity and financial condition.

Overview

We are a leader in secure, intelligent wireless technology for a more connected world. Our integrated hardware and software platform, intuitive development tools, industry leading ecosystem and robust support enable customers in building advanced industrial, commercial, home and life applications. We make it easy for developers to solve complex wireless challenges throughout the product lifecycle and get to market quickly with innovative solutions that transform industries, grow economies and improve lives. We provide analog-intensive, mixed-signal solutions for use in a variety of electronic products in a broad range of applications for the Internet of Things (IoT) including connected home and security, industrial automation and control, smart metering, smart lighting, commercial building automation, consumer electronics, asset tracking and medical instrumentation. We group our products as Industrial & Commercial or Home & Life based on the target markets they address.

As a fabless semiconductor company, we rely on third-party semiconductor fabricators in Asia, and to a lesser extent the United States and Europe, to manufacture the silicon wafers that reflect our IC designs. Each wafer contains numerous die, which are cut from the wafer to create a chip for an IC. We rely on third parties in Asia to assemble, package, and, in most cases, test these devices and ship these units to our customers. Testing performed by such third parties facilitates faster delivery of products to our customers (particularly those located in Asia), shorter production cycle times, lower inventory requirements, lower costs and increased flexibility of test capacity.

The sales cycle for our ICs can be as long as 12 months or more. An additional three to six months or more are usually required before a customer ships a significant volume of devices that incorporate our ICs. Due to this lengthy sales cycle, we typically experience a significant delay between incurring research and development and selling, general and administrative expenses, and the corresponding sales. Consequently, if sales in any quarter do not occur when expected, expenses and inventory levels could be disproportionately high, and our operating results for that quarter and, potentially, future quarters would be adversely affected. Moreover, the amount of time between initial research and development and commercialization of a product, if ever, can be substantially longer than the sales cycle for the product. Accordingly, if we incur substantial research and development costs without developing a commercially successful product, our operating results, as well as our growth prospects, could be adversely affected.

Because some of our ICs are designed for use in consumer products, we expect that the demand for our products will be typically subject to some degree of seasonal demand. However, rapid changes in our markets and across our product areas make it difficult for us to accurately estimate the impact of seasonal factors on our business.

30

Table of Contents

Discontinued Operations

On July 26, 2021, we sold our infrastructure and automotive business to Skyworks Solutions, Inc. for $2.75 billion in cash. The prior year comparable period results of operations of the sold component have been presented in the accompanying Consolidated Financial Statements as discontinued operations and, therefore, are excluded from the following discussion of the results of our continuing operations.

Current Period Highlights of Continuing Operations

Revenues increased $303.2 million in fiscal 2022 compared to fiscal 2021 due to increased revenues from both our Industrial & Commercial products and Home & Life products. Gross margin increased to 62.7% in fiscal 2022 compared to 59.0% in fiscal 2021 primarily due to increases in the price of our products and variations in product mix. Operating expenses increased $65.1 million in fiscal 2022 compared to fiscal 2021 due primarily to increased personnel-related expenses, outside services, new product introduction costs, depreciation expense, and sales commissions offset in part by a decrease in the amortization of intangible assets. Operating income (loss) in fiscal 2022 was $119.3 million compared to $(32.8) million in fiscal 2021.

We ended fiscal 2022 with $1.2 billion in cash, cash equivalents and short-term investments. Net cash provided by operating activities was $141.3 million during fiscal 2022. Accounts receivable were $71.4 million at December 31, 2022, representing 25 days sales outstanding (DSO). Inventory was $100.4 million at December 31, 2022, representing 90 days of inventory (DOI). In fiscal 2022, we acquired 6.9 million shares of our common stock for $887.6 million.

Through acquisitions and internal development efforts, we have continued to diversify our product portfolio and introduce new products and solutions with added functionality and integration. In fiscal 2022, we introduced a portfolio of Matter development solutions providing support for Matter over Wi-Fi, Matter over Thread, Bluetooth Low Energy (LE) commissioning, and Matter bridges to Zigbee and Z-Wave; an end-to-end development platform with complete connectivity support for Amazon Sidewalk; a new flagship SoC and power amplifier for Wi-SUN®, the FG25 SoC and EFF01 Front End Module designed to provide a sub-gigahertz transmission range of up to 3 kilometers in dense urban environments with no data loss; our first Wi-Fi 6 and Bluetooth LE SoC family ideal for battery-powered or energy-efficient IoT devices with always-on cloud connectivity; a Bluetooth Location Services solution using accurate, low-power Bluetooth devices to simplify Angle of Arrival (AoA) and Angle of Departure (AoD) location services; and a family of 2.4 GHz wireless SoCs for Bluetooth and multi-protocol operations with a built-in AI and Machine Learning (ML) accelerator, improving performance for AI and ML applications on battery-powered edge devices. We plan to continue introducing products that increase the content we provide for existing applications, thereby enabling us to serve markets we do not currently address and expand our total available market opportunity.

During fiscal 2022, 2021 and 2020, we had no customer that represented more than 10% of our revenues. In addition to direct sales to customers, some of our end customers purchase products indirectly from us through distributors and contract manufacturers. An end customer purchasing through a contract manufacturer typically instructs such contract manufacturer to obtain our products and incorporate such products with other components for sale by such contract manufacturer to the end customer. Although we actually sell the products to, and are paid by, the distributors and contract manufacturers, we refer to such end customer as our customer. Two of our distributors who sell to our customers, Arrow Electronics and Edom Technology, represented 33% and 17% during fiscal 2022, respectively. Three of our distributors, Arrow Electronics, Edom Technology and Sekorm, represented 28%, 18% and 12% of our revenues during fiscal 2021, and 28%, 19% and 14% of our revenues during fiscal 2020, respectively.

The percentage of our revenues derived from outside of the United States was 83% in fiscal 2022, 86% in fiscal 2021 and 88% in fiscal 2020. All of our revenues to date have been denominated in U.S. dollars. We believe that a majority of our revenues will continue to be derived from customers outside of the United States.

Results of Operations

The following describes the line items set forth in our Consolidated Statements of Income:

Revenues. Revenues are generated predominately by sales of our products. Our revenues are subject to variation from period to period due to the volume of shipments made within a period, the mix of products we sell and the prices we charge for our products.

31

Table of Contents

Cost of Revenues. Cost of revenues includes the cost of purchasing finished silicon wafers processed by independent foundries; costs associated with assembly, test and shipping of those products; costs of personnel and equipment associated with manufacturing support, logistics and quality assurance; costs of software royalties, other intellectual property license costs and certain acquired intangible assets; and an allocated portion of our occupancy costs. Our gross margin fluctuates depending on product mix, manufacturing yields, inventory valuation adjustments, average selling prices and other factors.

Research and Development. Research and development expense consists primarily of personnel-related expenses, including stock-based compensation, as well as new product masks, external consulting and services costs, equipment tooling, equipment depreciation, amortization of intangible assets and an allocated portion of our occupancy costs. Research and development activities include the design of new products, refinement of existing products and design of test methodologies to ensure compliance with required specifications.

Selling, General and Administrative. Selling, general and administrative expense consists primarily of personnel-related expenses, including stock-based compensation, as well as an allocated portion of our occupancy costs, sales commissions to independent sales representatives, amortization of intangible assets, professional fees, legal fees, and promotional and marketing expenses.

Interest Income and Other, Net. Interest income and other, net reflects interest earned on our cash, cash equivalents and investment balances, foreign currency remeasurement adjustments, and other non-operating income and expenses.

Interest Expense. Interest expense consists of interest on our short and long-term obligations, including our convertible senior notes and credit facility. Interest expense on our convertible senior notes includes contractual interest, amortization of debt issuance costs, and for periods prior to fiscal 2022, amortization of the debt discount.

Provision (Benefit) for Income Taxes. Provision (benefit) for income taxes includes both domestic and foreign income taxes at the applicable tax rates adjusted for non-deductible expenses, research and development tax credits and other permanent differences.

Equity-method Earnings. Equity-method earnings represents income or loss on our equity-method investment.

Income from discontinued operations, net of income taxes. Income from discontinued operations, net of income taxes includes the results of operations of our former infrastructure and automotive business.

The following table sets forth our Consolidated Statements of Income data as a percentage of revenues for the periods indicated:

​

​

32

Table of Contents

Comparison of Fiscal 2022 to Fiscal 2021

Revenues

​

​

The increase in revenues in fiscal 2022 was due to increased revenues of $196.3 million from our Industrial & Commercial products and $106.9 million from our Home & Life products. Unit volumes of our products increased while average selling prices increased substantially compared to fiscal 2021. The average selling prices of our products may fluctuate significantly from period to period due to changes in product mix, pricing decisions and other factors. In general, as our products become more mature, we expect to experience decreases in average selling prices.

Gross Profit

​

​

Gross profit increased in fiscal 2022 due primarily to increased product sales. The increase in gross profit in fiscal 2022 was due to increases in gross profit for both of our product groups. Gross margin increased primarily due to increases in the price of our products and variations in product mix. Increased product demand and production capacity constraints have increased the selling price and costs of our products, and has resulted in period-to-period fluctuations in our gross margin. We expect the prices we pay for inventory to continue to increase in future periods and that this will reduce our gross margins.

We may experience variations in the average selling prices of certain of our products. Increases in average selling prices may occur during periods of increased demand, but such demand may be short-lived and could be accompanied by higher product costs. Declines in average selling prices create downward pressure on gross margin and may be offset to the extent we are able to introduce higher margin new products and gain market share with our products; reduce costs of existing products through improved design; achieve lower production costs from our wafer suppliers and third-party assembly and test subcontractors; achieve lower production costs per unit as a result of improved yields throughout the manufacturing process; or reduce logistics costs.

Research and Development

​

​

The increase in research and development expense in fiscal 2022 was primarily due to increases of $48.6 million for personnel-related expenses, $2.6 million for new product introduction costs and $2.3 million for depreciation expense. The decrease in research and development expense as a percent of revenues in fiscal 2022 was due to our increased revenues. We expect that research and development expense will increase in absolute dollars in the first quarter of 2023 compared to the fourth quarter of 2022.

33

Table of Contents

Selling, General and Administrative

​

​

The increase in selling, general and administrative expense in fiscal 2022 was primarily due to increases of $5.1 million for personnel-related expenses, $4.0 million for outside services, and $1.3 million for sales commissions offset in part by a decrease of $7.1 million for the amortization of intangible assets. The decrease in selling, general and administrative expense as a percent of revenues in fiscal 2022 was due to our increased revenues. We expect that selling, general and administrative expense will remain relatively stable in absolute dollars in the first quarter of 2023 compared to the fourth quarter of 2022.

Interest Income and Other, Net

Interest income and other, net in fiscal 2022 was $13.9 million compared to $5.7 million in fiscal 2021. The increase in interest income and other, net in fiscal 2022 was primarily due to increased interest income earned as a result of higher market interest rates.

Interest Expense

Interest expense in fiscal 2022 was $6.7 million compared to $31.0 million in fiscal 2021. The decrease in interest expense in fiscal 2022 was primarily due to a decrease of $20.9 million in amortization of debt discount in fiscal 2022 and a loss of $3.4 million recorded on the early extinguishment of our remaining 2022 convertible senior notes in fiscal 2021. See Note 11, Debt, to the Consolidated Financial Statements for additional information.

Provision (Benefit) for Income Taxes

​

​

The increase in the effective tax rate for fiscal 2022 was primarily due to the recognition of certain tax benefits for fiscal 2021 in discontinued operations under the FASB ASU 2019-12, Simplifying the Accounting for Income Taxes, and the required adoption of new U.S. tax rules regarding the capitalization of research and experimental costs in fiscal 2022.

Equity-method Earnings

Equity-method earnings in fiscal 2022 were $3.4 million compared to $13.7 million in fiscal 2021. The decrease in equity-method earnings in fiscal 2022 was due to a decrease in the unrealized gains on an equity-method investment.

Income from discontinued operations, net of income taxes

​

​

There was no income from prior year discontinued operations in fiscal 2022. Income from discontinued operations in fiscal 2021 was $2.2 billion, including a gain on sale of $2.1 billion, net of tax.

34

Table of Contents

Business Outlook

The following represents our business outlook for the first quarter of fiscal 2023.

​

​

Liquidity and Capital Resources

Our principal sources of liquidity as of December 31, 2022 consisted of $1.2 billion in cash, cash equivalents and short-term investments, of which $0.9 billion was held by our U.S. entities. The remaining balance was held by our foreign subsidiaries. Our cash equivalents and short-term investments consisted of government debt securities, which include agency bonds, municipal bonds, variable rate demand notes and U.S. government securities; corporate debt securities, which include asset-backed securities, corporate bonds, commercial paper and Yankee bonds; and money market funds.

Operating Activities

Net cash provided by operating activities was $141.3 million during fiscal 2022, compared to net cash provided of $91.2 million during fiscal 2021. Operating cash flows during fiscal 2022 reflect our net income of $91.4 million, adjustments of $97.5 million for depreciation, amortization, stock-based compensation, equity-method earnings and deferred income taxes, and a net cash outflow of $47.6 million due to changes in our operating assets and liabilities.

Accounts receivable decreased to $71.4 million at December 31, 2022 from $98.3 million at January 1, 2022. The decrease in accounts receivable resulted primarily from normal variations in the timing of collections and billings. Our DSO was 25 days at December 31, 2022 and 42 days at January 1, 2022.

Inventory increased to $100.4 million at December 31, 2022 from $49.3 million at January 1, 2022. Our inventory levels will vary based on the availability of supply, and to a lesser extent, the impact of variations between forecasted demand used for purchasing inventory and actual demand. Increased product demand and higher product costs have increased the value of the inventory we hold. Our DOI was 90 days at December 31, 2022 and 55 days at January 1, 2022.

Investing Activities

Net cash provided by investing activities was $240.5 million during fiscal 2022, compared to net cash used of $476.7 million during fiscal 2021. The increase in cash inflows was principally due to a decrease in cash outflows of $714.0 million from net purchases, sales and maturities of marketable securities in 2022.

Financing Activities

Net cash used in financing activities was $887.1 million during fiscal 2022, compared to cash used of $1.3 billion during fiscal 2021. The decrease in cash outflows was principally due to a decrease of $266.6 million for repurchases of our common stock and a decrease of $140.6 million in payments on debt in fiscal 2022.

35

Table of Contents

Discontinued Operations

Net cash used in discontinued operations was $69.5 million during fiscal 2022 related to income tax payments, compared to net cash provided of $2.6 billion during fiscal 2021. The decrease in cash inflows was principally due to $2.75 billion in proceeds from the sale of our infrastructure and automotive business in fiscal 2021, offset by a decrease of $183.3 million for incomes tax payments on the gain on sale.

Debt

As of December 31, 2022, our debt included $535 million principal amount of convertible senior notes (the “2025 Notes”). On January 2, 2022, we irrevocably elected cash settlement for the principal amount of the 2025 Notes. We also had an undrawn $400 million revolving credit facility. We have an option to increase the size of the borrowing capacity of the revolving credit facility by up to the greater of an aggregate of $250 million and 100% of EBITDA, plus an amount that would not cause a secured leverage ratio to exceed 3.25 to 1.00, subject to certain conditions.

Capital Requirements

Our future capital requirements will depend on many factors, including the rate of sales growth, market acceptance of our products, the timing and extent of research and development projects, potential acquisitions of companies or technologies and the expansion of our sales and marketing activities. We believe our existing cash, cash equivalents, investments, credit under our credit facility, and cash generated from operations are sufficient to meet our short-term (i.e., over at least the next twelve months) and long-term capital requirements, although we could be required, or could elect, to seek additional funding prior to that time. We may enter into acquisitions or strategic arrangements in the future which also could require us to seek additional equity or debt financing.

Contractual Obligations

Our purchase obligations primarily include contractual arrangements in the form of purchase orders and purchase commitments with suppliers. As of December 31, 2022, such purchase obligations were $134.2 million. For a description of other contractual obligations, see Note 11, Debt, and Note 12, Leases, to the Consolidated Financial Statements.

Comparison of Fiscal 2021 to Fiscal 2020

​

A discussion of changes in our results of operations and liquidity and capital resources from fiscal 2020 to fiscal 2021 has been omitted from this Form 10-K, but may be found in “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” of our Form 10-K filed with the Securities and Exchange Commission on February 2, 2022.

Critical Accounting Estimates

The preparation of financial statements and accompanying notes in conformity with U.S. generally accepted accounting principles requires that we make estimates and assumptions that affect the amounts reported. Changes in facts and circumstances could have a significant impact on the resulting estimated amounts included in the financial statements. We believe the following critical accounting policies affect our more complex judgments and estimates.

Inventory valuation – We assess the recoverability of inventories through the application of a set of methods, assumptions and estimates. In determining net realizable value, we write down inventory that may be slow moving or have some form of obsolescence, including inventory that has aged more than 12 months. We also adjust the valuation of inventory when its manufacturing cost exceeds the estimated selling price less costs of completion, disposal and transportation. We assess the potential for any unusual customer returns based on known quality or business issues and write-off inventory losses for scrap or non-saleable material. Inventory not otherwise identified to be written down is compared to an assessment of our 12-month forecasted demand. The result of this methodology is compared against the product life cycle and competitive situations in the marketplace to determine the appropriateness of the resulting inventory levels. Demand for our products may fluctuate significantly over time, and actual demand and market conditions may be more or less favorable than those that we project. In the event that actual demand is lower or market conditions are worse than originally projected, additional inventory write-downs may be required.

36

Table of Contents

Impairment of goodwill and other long-lived assets – We review long-lived assets which are held and used, including fixed assets and purchased intangible assets, for impairment whenever changes in circumstances indicate that the carrying amount of the assets may not be recoverable. Such evaluations compare the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset over its expected useful life and are significantly impacted by estimates of future prices and volumes for our products, capital needs, economic trends and other factors which are inherently difficult to forecast. If the asset is considered to be impaired, we record an impairment charge equal to the amount by which the carrying value of the asset exceeds its fair value determined by either a quoted market price, if any, or a value determined by utilizing a discounted cash flow technique.

We test our goodwill for impairment annually as of the first day of our fourth fiscal quarter and in interim periods if certain events occur indicating that the carrying value of goodwill may be impaired. We assess goodwill for impairment by comparing the fair value of a reporting unit to its carrying amount. In determining fair value, several valuation methodologies are allowed, although quoted market prices are the best evidence of fair value. If the fair value of the reporting unit is less than its carrying amount, we recognize an impairment loss equal to that excess amount.

Acquired intangible assets – When we acquire a business, a portion of the purchase price is typically allocated to identifiable intangible assets, such as acquired technology and customer relationships. Fair value of these assets is determined primarily using the income approach, which requires us to project future cash flows and apply an appropriate discount rate. We amortize intangible assets with finite lives over their expected useful lives. Our estimates are based upon assumptions believed to be reasonable but which are inherently uncertain and unpredictable. Assumptions may be incomplete or inaccurate, and unanticipated events and circumstances may occur. Incorrect estimates could result in future impairment charges, and those charges could be material to our results of operations.

Revenue recognition – We recognize revenue when control of the promised goods or services is transferred to customers, in an amount that reflects the consideration we expect to be entitled to in exchange for those goods or services. In order to achieve this core principle, we apply a five-step process. As part of this process, we analyze the performance obligations in a customer contract and estimate the variable consideration we expect to receive. The evaluation of performance obligations requires that we identify the promised goods and services in the contract. For contracts that contain more than one promised good and service, we then must determine whether the promises are capable of being distinct and if they are separately identifiable from other promises in the contract. Variable consideration primarily includes sales made to distributors under agreements allowing certain rights of return, referred to as stock rotation, and credits issued to the distributor due to price protection. We estimate variable consideration at the most likely amount to which we expect to be entitled. We make these estimates based on available information, including recent sales activity and pricing data. We apply a constraint to our variable consideration estimate which considers both the likelihood of a return and the amount of a potential price concession. If our evaluation of performance obligations is incorrect, we may recognize revenue sooner or later than is appropriate. If our estimates of variable consideration are inaccurate, we may recognize too much or too little revenue in a period. We may adjust assumptions used to estimate consideration periodically based on analysis of prior estimates.

Stock-based compensation – We recognize the fair-value of stock-based compensation transactions in the Consolidated Statements of Income. The fair value of our full-value stock awards (with the exception of market-based performance awards) equals the fair market value of our stock on the date of grant. The fair value of our market-based performance awards is estimated at the date of grant using a Monte-Carlo simulation. The fair value of our stock option and employee stock purchase plan grants is estimated at the date of grant using the Black-Scholes option pricing model. In addition, we are required to estimate the expected forfeiture rate of our stock grants and only recognize the expense for those shares expected to vest. If our actual experience differs significantly from the assumptions used to compute our stock-based compensation cost, or if different assumptions had been used, we may have recorded too much or too little stock-based compensation cost. See Note 16, Stock-Based Compensation, to the Consolidated Financial Statements for additional information.

Income taxes – We are required to calculate income taxes in each of the jurisdictions in which we operate. This process involves calculating the actual current tax liability together with assessing temporary differences in recognition of income (loss) for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included in our Consolidated Balance Sheets. We record a valuation allowance when it is more likely than not that some portion or all of the deferred tax assets will not be realized. In assessing the need for a valuation allowance, we are required to estimate the amount of expected future taxable income. Judgment is inherent in this process, and differences between the estimated and actual taxable income could result in a material impact on our Consolidated Financial Statements.

37

Table of Contents

We recognize liabilities for uncertain tax positions based on a two-step process. The first step requires us to determine whether the weight of available evidence indicates that the tax position has met the threshold for recognition. Therefore, we must evaluate whether it is more likely than not that the position will be sustained on audit, including resolution of any related appeals or litigation processes. The second step requires us to measure the tax benefit of the tax position taken, or expected to be taken, in an income tax return as the largest amount that is more than 50% likely of being realized upon ultimate settlement. This measurement step is inherently complex and requires subjective estimations of such amounts to determine the probability of various possible outcomes. We re-evaluate the uncertain tax positions each quarter based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, expirations of statutes of limitation, effectively settled issues under audit, and new audit activity. Such a change in recognition or measurement would result in the recognition of a tax benefit or an additional charge to the tax provision in the period.

Although we believe the measurement of our liabilities for uncertain tax positions is reasonable, no assurance can be given that the final outcome of these matters will not be different than what is reflected in the historical income tax provisions and accruals. If additional taxes are assessed as a result of an audit or litigation, they could have a material effect on our income tax provision and net income in the period or periods for which that determination is made. We operate within multiple taxing jurisdictions and are subject to audit in these jurisdictions. These audits can involve complex issues which may require an extended period of time to resolve and could result in additional assessments of income tax. We believe adequate provisions for income taxes have been made for all periods.

Recent Accounting Pronouncements

Information regarding recent accounting pronouncements is provided in Note 2, Significant Accounting Policies, to the Consolidated Financial Statements. Such information is incorporated by reference herein.

​

Item 7A.    Quantitative and Qualitative Disclosures about Market Risk

Interest Income

Our investment portfolio includes cash, cash equivalents and short-term investments. Our main investment objectives are the preservation of investment capital and the maximization of after-tax returns on our investment portfolio. Our interest income is sensitive to changes in the general level of U.S. interest rates. A 100 basis point decline in yield on our investment portfolio holdings as of December 31, 2022 would decrease our future annual interest income by approximately $11.0 million. Our investment portfolio holdings as January 1, 2022 yielded less than 100 basis points. A decline in yield to zero basis points on our investment portfolio holdings as of January 1, 2022 would decrease our future annual interest income by approximately $3.6 million. We believe that our investment policy, which defines the duration, concentration, and minimum credit quality of the allowable investments, meets our investment objectives.

Interest Expense

We are exposed to interest rate fluctuations in the normal course of our business, including through our credit facility. The interest rate on the credit facility consists of a variable-rate of interest and an applicable margin. While we have drawn from the credit facility in the past, we have no borrowings as of December 31, 2022. If we borrow from the credit facility in the future, we will again be exposed to interest rate fluctuations.

Foreign currency exchange rate risk

We are exposed to foreign currency exchange rate risk primarily through assets, liabilities and operating expenses of our subsidiaries denominated in currencies other than the U.S. dollar. Our foreign subsidiaries are considered to be extensions of the U.S. parent. The functional currency of the foreign subsidiaries is the U.S. dollar. Accordingly, gains and losses resulting from remeasuring transactions denominated in currencies other than U.S. dollars are recorded in the Consolidated Statements of Income. We use foreign currency forward contracts to manage exposure to foreign exchange risk. Gains and losses on foreign currency forward contracts are recognized in earnings in the same period during which the hedged transaction is recognized.

​

Item 8.    Financial Statements and Supplementary Data

The Financial Statements and supplementary data required by this item are included in Part IV, Item 15 of this Form 10-K and are presented beginning on page F-1.

38

Table of Contents

Item 9.    Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

​

Item 9A.    Controls and Procedures

Evaluation of Disclosure Controls and Procedures

We have performed an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer (CEO) and Chief Financial Officer (CFO), of the effectiveness of our disclosure controls and procedures, as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the Exchange Act). Based on that evaluation, our management, including our CEO and CFO, concluded that our disclosure controls and procedures were effective as of December 31, 2022 to provide reasonable assurance that information required to be disclosed by us in the reports filed or submitted by us under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. Such disclosure controls and procedures include controls and procedures designed to ensure that information required to be disclosed is accumulated and communicated to our management, including our CEO and CFO, to allow timely decisions regarding required disclosures.

Changes in Internal Control over Financial Reporting

There was no change in our internal controls during the fiscal quarter ended December 31, 2022 that materially affected, or is reasonably likely to materially affect, our internal controls over financial reporting.

Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control system was designed to provide reasonable assurance to our management and Board of Directors regarding the preparation and fair presentation of published financial statements.

Our management assessed the effectiveness of our internal control over financial reporting as of December 31, 2022. In making this assessment, it used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control—Integrated Framework (2013 framework). Based on our assessment we concluded that, as of December 31, 2022, our internal control over financial reporting is effective based on those criteria.

Our independent registered public accounting firm, Ernst & Young LLP, issued an attestation report on our internal control over financial reporting. This report appears on page F-3.

Item 9B.    Other Information

On January 26, 2023, the Compensation Committee of the Board of Directors of the Company approved a form of Performance Stock Units Grant Notice and Global PSU Award Agreement (the “PSU Award Agreement”) under its 2009 Stock Incentive Plan, as amended and restated, attached hereto as Exhibit 10.20.

The PSU Awards will be earned based upon the level of achievement of the following three performance criteria (each as defined in the PSU Award Agreement):

The PSU Awards are all subject to the terms and conditions of the 2009 Stock Incentive Plan, as amended and restated, and the form of PSU Award Agreement, a copy of which is attached as Exhibit 10.20 to this Form 10-K and incorporated herein by reference.

39

Table of Contents

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections

None.

​

Part III

Certain information required by Part III is omitted from this report because we intend to file a definitive Proxy Statement pursuant to Regulation 14A (the “Proxy Statement”) no later than 120 days after the end of the fiscal year covered by this report, and certain information to be included therein is incorporated herein by reference.

Item 10.    Directors, Executive Officers and Corporate Governance

The information required by this Item is incorporated by reference to the Proxy Statement under the sections captioned “Proposal One: Election of Directors,” “Executive Compensation,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Code of Ethics.”

​

Item 11.    Executive Compensation

The information under the caption “Executive Compensation” and “Proposal One: Election of Directors” appearing in the Proxy Statement, is incorporated herein by reference.

​

Item 12.    Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information under the caption “Ownership of Securities” and “Equity Compensation Plan Information” appearing in the Proxy Statement is incorporated herein by reference.

​

Item 13.    Certain Relationships and Related Transactions, and Director Independence

The information under the caption “Certain Relationships and Related Transactions, and Director Independence” appearing in the Proxy Statement is incorporated herein by reference.

​

Item 14.    Principal Accounting Fees and Services

The information under the caption “Proposal Two: Ratification of Appointment of Independent Registered Public Accounting Firm” appearing in the Proxy Statement is incorporated herein by reference.

​

40

Table of Contents

Part IV

Item 15.    Exhibits and Financial Statement Schedules

(a)   1.    Financial Statements

Index

​

​

2.    Schedules

All schedules have been omitted since the information required by the schedule is not applicable, or is not present in amounts sufficient to require submission of the schedule, or because the information required is included in the Consolidated Financial Statements and notes thereto.

3.    Exhibits

The exhibits listed on the accompanying index to exhibits immediately following the Consolidated Financial Statements are filed as part of, or hereby incorporated by reference into, this Form 10-K.

​

41

Table of Contents

(b)   Exhibits

The following exhibits are filed as part of this report:

42

Table of Contents

*     Incorporated herein by reference to the indicated filing.

+     Management contract or compensatory plan or arrangement

​

Item 16.    Form 10-K Summary

None.

​

43

Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in Austin, Texas, on February 1, 2023.

​

​

​

​

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints R. Matthew Johnson and John C. Hollister and each of them, acting individually, as his or her attorney-in-fact, each with full power of substitution and resubstitution, for him or her and in his or her name, place and stead, in any and all capacities, to sign any and all amendments to this annual report on Form 10-K and other documents in connection herewith and therewith, and to file the same, with all exhibits thereto, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in connection herewith and therewith and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or any of them, or their or his substitute or substitutes, may lawfully do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated: